Talking about the details of the tool cabinet

As an important tool for enterprise management to place tools, knives and parts, tool cabinets are extremely common in our work, and even many people can easily identify the material of the tool cabinet with a few glances. But the material does not represent the quality of the tool cabinet, and some small details can actually measure the technical level of the ex-factory price.

1. Forming and welding of tool cabinet. This element is directly related to the gap between the cabinet body of the tool cabinet and the cabinet door and the door frame. If the solder joints are too large, the anti-pry function will be weakened. If possible, the cabinet should be stamped and formed at one time as much as possible, thereby reducing the number of welding points and enhancing its robustness.

2. The drawer pull-out degree. Generally speaking, the drawer of the single-rail tool cabinet can be pulled out 80%, and the double-rail tool cabinet can be pulled out 100%. In this regard, you can choose according to your actual needs.

3. Safety buckle. Each drawer of the tool cabinet must be equipped with a safety buckle, which can effectively prevent the tool cabinet drawer from accidentally sliding out during movement, causing economic or personnel damage.

4. Anti-rust treatment Under normal circumstances, the anti-rust treatment of the tool cabinet must go through the processes of degreasing, rust removal, pickling and baking. These processes are indispensable, otherwise it will directly affect the service life of the tool cabinet.